Floors and dirt
Floor material, cleaning area and the type of dirt. The manufacturer lists tile, concrete, stone, terrazzo and epoxy floors.
Cleaning robots
SCL-AWG50 — autonomous cleaning robot
1 / 4 SCL-AWG50 · 3D modelDrag to rotate · pinch to zoom
Loading 3D model… Matched to your facility
What should you check before choosing?
Routes and site traffic
Aisle widths, slopes and access to cleaning areas. The stated minimum aisle width is 900 mm; the actual route and safe operating conditions must be assessed on site.
Schedule and station
Cleaning windows, runtime and station location. Automatic refilling and wastewater discharge require a service station and suitable site utilities.
Data for selecting a solution
SCL-AWG50 technical specifications
Cleaning and performance
| Cleaning width | 500 mm |
|---|---|
| Dry dust-pushing width | 670 mm |
| Cleaning rate | up to 1800 m²/h |
| Clean-water tank | 34 L |
| Wastewater tank | 34 L |
| Cleaning distance along the edge | 10–20 cm |
| Suitable floors | Tile, concrete, stone, terrazzo, epoxy |
Dimensions and operating conditions
| Nominal dimensions (L × W × H) | 900 × 676 × 1080 mm |
|---|---|
| Weight | 140 ± 10 kg |
| Minimum aisle width | 900 mm |
| Travel speed | 3.6 km/h |
| Route slope | < 8° |
| Noise level | < 70 dB(A) |
Navigation and system integration
| Navigation | Laser SLAM |
|---|---|
| Connectivity | Ethernet / Wi-Fi |
| Obstacle detection | 3D camera and laser sensors |
| Protective functions described by the manufacturer | Obstacle avoidance, stopping and fall prevention |
| Maximum braking distance | < 20 cm; depends on the floor material |
| Dispatch system listed by the manufacturer | SEER RDS; integration scope to be agreed |
Battery and service station
| Battery | 24 V / 50 Ah, LiFePO4 |
|---|---|
| Charging time | 1 h |
| Runtime — dust collection | 8–10 h |
| Runtime — mopping | 2–4 h |
| Station functions | Charging, clean-water refilling and wastewater discharge; configuration to be agreed |
Specifications are taken from the manufacturer's datasheet. Cleaning rate and runtime depend on conditions, dirt and the schedule. Station availability and equipment are confirmed in the quotation.
The manufacturer's table gives nominal dimensions of 900 × 676 × 1080 mm. The drawings contain different reference dimensions, including 675 and 1062 mm. Confirm the selected configuration's envelope before designing routes or a station; the 3D preview is not an installation drawing.
Before choosing SCL-AWG50
Can the robot refill and discharge water automatically?
The manufacturer provides these functions with a service station. Its configuration, water supply, drainage and power connection must be agreed for the individual facility.
Can it work with other systems?
The datasheet lists the SEER RDS dispatch system and Ethernet / Wi-Fi connectivity. Connections to other systems, traffic management and the level of automation require an agreed integration scope.
Is 1800 m²/h a guaranteed cleaning rate?
This is the maximum value stated by the manufacturer. Actual performance depends on the floor layout, obstacles, dirt and servicing stops. Selection is based on conditions at your facility.